Pellet Stove Furnace
Pellet stoves are available as freestanding units or fireplace inserts that give your home the look of an authentic fireplace with wood burning. These stoves are available in freestanding models or as fireplace inserts. They can provide the appearance of a traditional wood-burning fire.
The auger transports pellets from the hopper to the combustion chamber in the combustion chamber, where they are burned and produce heat. Sensors monitor the flame and can adjust the speed of operation in order to maintain the desired temperature in the room.
1. Energy Efficiency
Pellet stoves burn renewable non-toxic, non-toxic fuel that is made from compressed sawdust and wood chips. They also contain bark, and other materials that are normally dumped in landfills, but can be turned into an efficient and clean source of heating. They aid homeowners in reducing their energy usage, and thus greenhouse gas emissions. Many people who use pellet stoves report that they can recoup their initial investment in just a few short years by reducing their heating costs.
Pellets are much more dense and compressed than natural wood, making them more efficient to burn. They also produce less creosote buildup than traditional fireplaces that burn wood. They are also packed in plastic bags that seal out moisture and require less frequent cleaning.
Like other heating systems pellet stoves need to be properly size and vented. A qualified technician can assess your space and venting requirements to ensure the best results.
When the installation is completed, a hearth will be constructed according to your specifications, and the vent is installed via an opening that is cut into the siding of your home. The vent can be run out a side wall or through the roof, based on your preference and the local regulations.
Once the vent and hearth are completed and the stove is ready to be plugged in. Certain manufacturers offer an electronic remote control that makes it simple to begin and maintain the fire, while others provide additional sensors to check airflow and combustion as well as flue temperatures and pressure. If the system determines that it needs more pellets or less, it sends a signal to the auger that it should speed up or slow it down accordingly.
All stoves have a storage hopper which can hold between 35 and 130 pounds of pellets. The size of the hopper determines how often you'll need to replenish your stove. Larger hoppers can be used for longer time periods before refills is required. A grille draws air out of the room, passes it through the heat exchanger and blows heated air into the living area through convection. A auger, grate or any other device distributes the pellets and a pan beneath will collect any pellets that are not burned as well as combustion residue.
Although pellet stoves are more efficient than wood-burning models they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of stoves require electricity. This could cause a problem in a power failure, although backup systems like generators and batteries are readily available.
2. Low Maintenance
Pellet stoves are extremely efficient, however they require some maintenance in order to run correctly. Cleaning your stove and exhaust vent regularly will prevent the buildup of harmful creosote, which could lead to a fire or an explosion that could damage the stove and/or your home.
A pellet stove burns compressed natural wood pellets or other materials (like nutshells, corn kernels or small pieces of scrap wood). The pellets are introduced into the combustion chamber through an auger that is powered by electricity. The thermostat you choose controls the speed of pellets being fed to the burner. This allows the fire to remain roaring or modulate lower or even shut down according to the temperature you set. When the fire goes out the ash is then thrown into an empty ash tray beneath the burner. It can then be easily removed and disposed of.
Pellets are made from byproducts that would have been discarded when processing lumber. They are a sustainable source and produce less particles than traditional wood-burning appliances, making pellet stoves a cleaner heat source. The amount of carcinogens, carbon monoxide and other harmful chemicals released from pellet stoves are also significantly lower than the more modern EPA certified wood stoves.
They are not required to be vented via chimneys, as is the case with traditional wood stoves. Instead, they can be vented properly through a wall, or another exterior structure. Pellet stoves come with flue ports that open at the top or rear of the appliance. They are connected to a vent pipe that extends outside the home.
A pellet stove has one drawback that you must purchase or store enough fuel pellets for the entire winter time. Pellet stove owners typically consume three tons of wood pellets per winter, at a cost of $200 per ton. The cost can be high but they're cheaper than purchasing firewood and then hauling it away for the wood-burning fireplace or stove. Make sure that you purchase enough pellets to ensure your stove will last through the coldest months and that you have the right location to store them (preferably cool, dry and off the ground).
3. Reduced Carbon Footprint
Pellet stoves generate heat from renewable biomass fuel, which reduces the need for finite fossil fuels. This helps reduce the carbon footprint and helps diversify energy sources in homes.
The emissions of pellet stoves are considerably lower than those from woodstoves, including the latest stoves that are EPA-certified. The emissions from pellet stoves are considerably lower than ones from gas furnaces. Pellets are made from sawdust and bark as well as other lumber remnants. They could also include soybeans, corn, or agricultural waste. When they are burned, they release fewer particulates (leading to respiratory problems and allergies), carcinogens, carbon monoxide, and the nitrous oxides.
The primary difference between the wood stove and the pellet stove is the feed system. Pellet stoves are equipped with hoppers that hold the pellets. When the thermostat or sensors suggest that the room needs heating, the furnace turns. The pellets are then put into the combustion chamber and burn to generate heat. The air from combustion chamber is pumped through a heat exchanger which transmits heat to the blower. This process results in low emissions and no creosote buildup.
When the hopper is empty, a cyclone action removes the ash and places it in an ash pot. The stove also has fans to circulate the warm, clean air throughout the living area. The majority of pellet stoves are designed to operate with minimal maintenance and come with a large view window that allows you and your family to enjoy the flames.
The most significant factor affecting pellet stove emissions is the quality of the pellets. The poor quality pellets will result in more emissions. When choosing your pellets ensure that they're certified to meet certain standards and do not contain other ingredients like petroleum or urea. Choose a company that offers a guarantee and will repair or replace parts in the event of a problem. If you're looking to take the greener route certain states permit homeowners to claim a tax credit for installing pellet stoves. This is a great way to help offset the initial cost of this kind of stove and make it more affordable to set up.
4. Reduced Noise
Pellet stoves emit very little smoke or exhaust when compared to wood-burning fireplaces. A fan is used to spread heat more evenly throughout the room. This is among the reasons pellet stoves require much less maintenance than traditional wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to prevent their deterioration stoves can be cleaned with an electric vacuum cleaner.
Many manufacturers have made a conscious effort to design their stoves to be easy to set up, operate and maintain. Their appliances come in a variety of styles that complement the decor of your home. Some include a programmable thermostat and remote control as well as a WIFI app so you can control and monitor your stove from anywhere in the world.
The majority of pellet stoves have an enormous fuel hopper that can hold between 35 and 130 pounds of pellets. The pellets are then pumped into the combustion chamber via an auger. The speed at which the pellets are fed to the burner determines how hot the fire is and also the amount of heat produced. The hopper can either be filled with hardwood pellets, made from dense wood species like hickory and oak, or softwood pellets. A lot of stoves can use biomass pellets made of switchgrass and corn. This is an environmentally friendly alternative.
Pellet stoves produce less smoke and require less maintenance due to the fact that they use cleaner fuel than wood-burning fireplaces. click the following page do not need chimneys and are the best option for retrofits or new construction.
As opposed to wood stoves that require regular maintenance to keep cleaned of creosote and other chemicals, pellet stoves only need to be periodically inspected to ensure proper operation and maintenance. This may include regular cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. Your appliance dealer will be able to explain the proper procedure for your specific brand and model. He can also assist you to identify the right fuel for your stove and provide information on storage and safety.